tripod and stand cases
Home » camera and photo » accessories » cases and bags » tripod and stand cases » digital concepts 70 3-section deluxe tripod with
|
GADGET HAT
|
||||||||||||||||||||||||||||
|
Digital Concepts 70 3-section Deluxe Tripod with The following report compares gadgets using the SERCount Rating (base on the result count from the search engine). |
||||||||||||||||||||||||||||
|
POPULAR HAT - 2006-02-13 11:12:00 | © Copyright 2004 - www.hat.net () | sitemap | top |
Why I chose this one: This unit offered good height, light weight, a "fluid head" for smooth pans with the video camera, a snap-in base plate, and a carry bag - all at a great price.
Why I'm returning this one:
Least reason: The base plate attaches to the camera using a built in plastic tab attached to the screw. While this is a convenient idea, the tab must be folded down flat to get the base to lock onto the tripod. Not so bad until you want to remove the plate - you may need a screwdriver to pry up the tab or risk losing a fingernail. The screw itself does not have slots for a screwdriver.
Most reason: The stability I took for granted in my old tripod is lacking in the new one. Specifically:
1. The legs flex. On a vinyl floor, it was difficult to get a stable stance because the extended legs woud, one-by-one, flex and "dance" across the floor. On less-slick surfaces the feet stayed in place, but there was still movement in the unit.
2. The top pole (that raises with the crank) is shaky when extended. The idea of the "fluid head" for smooth pans seems lost when touching the camera causes considerable wobble in the bar itself. The top pole is better left down. (Yes, I tightend the connections.)
3. The bars of the center brace are attached by loose-fitting rivets. The brace may prevent the unit from collapsing should you need to set the legs at a narrower stance, but it does little to "solidify" the tripod.
Summary: At full height, it was difficult to take even still pictures without movement in the tripod. The setup may look stable, but then you have to touch the camera (unless you have a remote). It's worse with the video camera - I was unable to get a smooth pan in spite of the "fluid head". Stability is better at half-height.