The following report compares gadgets using the SERCount Rating (base on the result count from the search engine).
Note: due to some search engine quota, not all result is available yet.

Linksys PPSX1 EtherFast 10/100 1-Port PrintServer

Made:	Linksys
Media:	Electronics
Sales Rank:	14414
Availability:	Usually ships in 24 hours
List Price:	$170.99
Our Price*:	$92.99

*Price subject to change

Buy from Amazon.com

Connect your printer to most networks in minutes
Runs with most laser, ink-jet, Bubble Jet, color, and dot matrix parallel printers
Stand-alone unit--no dedicated print server PC required
Management tools integrate seamlessly with Windows 98, 95, NT, and NetWare
Supports DHCP

Rating: 3.4/5 from 5 reviews

Overpriced

Rating: 5/5

This item can be purchased at a cheaper price elsewere,if you look around.
Try Outpost and some other sites or go to pricegrabber.com

Easy to set up, but very low performer

Rating: 3/5

This unit took nearly no time to set up: the DHCP server on the network gave it an address instantly. It happily supports JetDirect (port 9100/tcp) printing, but performance is lousy. Even on a 100mbit network, it did no better than 58kbytes/second throughput measured during careful tests. Our application included >22 megabyte image files to a color printer.

For low-volume printouts (say, text reports from an accounting system), this looks like a winner, but for anything requiring any real throughput, it's not going to be too useful. The same image that took two and a half minutes using this device took eleven seconds to a real HP LaserJet 4100 printer.

No problem with the install

Rating: 4/5

I installed this device simply by accepting all the defaults in the setup. I'm using an Epson 900 Stylus ink printer. It's the default printer for all the computers on my network. It's attached to a 10BaseT hub that is connected to a Linksys 4-port DSL/Cable modem router. DHCP is enabled in the router and the print server uses that for an IP address. It's all working with no problem.